We Engineer the Process that Guarantees a Perfect Result.

Industrial painting coating equipment is primarily categorized by the type of coating it applies. The main categories are: 1. Liquid Finishing Systems, which include equipment for conventional spray painting (guns, booths, pumps), electrostatic liquid painting for higher efficiency, and dip-coating methods like E-coating for total immersion. 2. Powder Coating Systems, which use electrostatic guns to apply a dry powder, which is then melted and fused in a curing oven. Each of these systems is a complete line that also includes critical pretreatment and curing equipment. TIMS COATING is an expert manufacturer of all types of painting coating equipment.

A "paint kitchen" is the heart of any liquid painting coating equipment system. It is a dedicated, controlled room or area where the paint is stored, mixed, temperature-controlled, and pumped to the spray guns on the production line. A high-quality fluid handling system from TIMS COATING will include pumps, pressure regulators, viscosity control units, and fluid heaters to ensure that the paint arriving at the spray gun is always at the perfect, consistent specification. This is absolutely critical for achieving a repeatable, high-quality finish. Without a proper paint kitchen, even the best spray booth and robot will produce inconsistent results.

Improving transfer efficiency (T.E.) is the fastest way to reduce costs and waste. The solution lies in your painting coating equipment. If you are using conventional air spray guns, upgrading to High-Volume, Low-Pressure (HVLP) or Air-Assisted Airless guns can significantly boost T.E. The next and most effective step is to implement electrostatic equipment. An electrostatic spray gun from a TIMS COATING system applies an electrical charge to the paint particles, which are then actively attracted to the grounded part. This "wraparound" effect dramatically increases the amount of paint that lands on the product, often boosting transfer efficiency from 30-40% to over 60-70% or even higher.

Calculating the ROI for a new painting coating equipment system requires looking beyond the initial purchase price. A modern system from TIMS COATING delivers returns in multiple areas. 1. Material Savings: Calculate your current paint/powder cost and multiply it by the percentage improvement in transfer efficiency (e.g., a 20-30% savings). 2. Labor Savings: Determine the number of manual painters that can be reassigned due to automation. 3. Rework Reduction: Estimate the cost of your current scrap and rework rate and apply a significant reduction (e.g., 80-90%). 4. Throughput Increase: Calculate the value of the additional parts you can produce per hour. 5. Energy Savings: Factor in lower energy use from efficient ovens. When you sum these operational savings, you will often find that a new painting coating equipment system provides a compelling ROI in just 1-3 years.