A VOC-Free, Environmentally Friendly Finishing Solution.

For most metal applications, a finish applied with powder coating equipment is significantly more durable than traditional liquid paint. The reason lies in the chemistry and thickness. Powder coating is applied much thicker than liquid paint, providing a more robust barrier against physical impacts. More importantly, the powder is made of thermal-set polymers that, when cured in an oven, cross-link to form a very hard, dense, and plastic-like shell. This finish is highly resistant to chipping, scratching, abrasion, and fading. While some high-performance liquid paints are very tough, for general industrial and consumer products, powder coating holds a clear advantage in durability.

Powder coating equipment works through a multi-stage process. 1. Pretreatment: A metal part is first thoroughly cleaned and prepared in a series of chemical washes. 2. Application: The part is then moved into a spray booth. An electrostatic spray gun applies a positive charge to particles of a dry, paint-like powder and sprays them towards the negatively grounded part. The opposing charges cause the powder to adhere to the entire surface. 3. Curing: The powder-covered part is then moved into a curing oven. The heat melts the powder, causing it to flow together and form a smooth, liquid-like layer. As it continues to heat, it chemically cross-links to form a hard, durable, and solid finish.

Powder reclamation is the process of capturing unused powder (overspray) in a spray booth and recycling it for reuse. It is the single most important feature for the economic and environmental viability of an powder coating equipment system. A high-efficiency booth from TIMS COATING uses a cyclonic separator to remove over 98% of the overspray from the air. This reclaimed powder is sieved and mixed back in with the fresh powder from the feed hopper. This closed-loop process means that unlike liquid paint where overspray is hazardous waste, powder overspray is a reusable raw material, drastically cutting material costs and waste disposal fees.

The cost of industrial powder coating equipment varies dramatically based on size, complexity, and level of automation. A simple manual system with a small booth and oven for a job shop might be a modest investment. A fully automated, conveyorized line with robotic applicators, quick color-change capabilities, and a large, high-efficiency oven for a major manufacturer can be a significant capital project. It is crucial to evaluate the ROI based on savings in labor, material (due to reclamation), energy, and rework. A high-efficiency powder coating equipment system from TIMS COATING often provides a rapid return on investment, especially for businesses switching from liquid paint.