Over 22 Years of Finishing System Expertise.

Industrial painting coating equipment is primarily categorized by the type of coating it applies. The main categories are: 1. Liquid Finishing Systems, which include equipment for conventional spray painting (guns, booths, pumps), electrostatic liquid painting for higher efficiency, and dip-coating methods like E-coating for total immersion. 2. Powder Coating Systems, which use electrostatic guns to apply a dry powder, which is then melted and fused in a curing oven. Each of these systems is a complete line that also includes critical pretreatment and curing equipment. TIMS COATING is an expert manufacturer of all types of painting coating equipment.

Improving transfer efficiency (T.E.) is the fastest way to reduce costs and waste. The solution lies in your painting coating equipment. If you are using conventional air spray guns, upgrading to High-Volume, Low-Pressure (HVLP) or Air-Assisted Airless guns can significantly boost T.E. The next and most effective step is to implement electrostatic equipment. An electrostatic spray gun from a TIMS COATING system applies an electrical charge to the paint particles, which are then actively attracted to the grounded part. This "wraparound" effect dramatically increases the amount of paint that lands on the product, often boosting transfer efficiency from 30-40% to over 60-70% or even higher.

Coating plastics requires specialized painting coating equipment due to two main challenges: adhesion and heat sensitivity. First, plastics have low surface energy, so they must be pretreated to ensure the paint will stick. This often involves flame treatment, plasma treatment, or applying a special adhesion promoter. Second, plastics cannot withstand the high temperatures used to cure coatings on metal. Therefore, the painting coating equipment must include a low-temperature curing solution, such as an infrared (IR) oven or an ultraviolet (UV) curing system, which can cure specialized coatings in seconds with minimal heat. TIMS COATING engineers complete lines specifically for the challenges of finishing plastic components.

A paint spray booth is a critical piece of painting coating equipment that provides a safe, clean, and controlled environment for the application of liquid or powder coatings. Its primary function is safety: it contains hazardous overspray and fumes and exhausts them through a filtration system. Its second function is quality: downdraft or cross-draft airflow systems prevent airborne dust from settling on the wet parts, and proper lighting allows operators or robots to apply a perfect coat. A high-performance spray booth from TIMS COATING is an engineered environment that is essential for achieving a professional, defect-free finish.